From TDS to pH: The Definitive Guide to the Water in Your Cup
🔒 AVAILABLE IN COMPLETE EDITION
The Complete edition of The Water Chemistry Handbook for Tea Extraction also includes:
• Target water profiles by tea category: Specific TDS/GH/KH/pH ranges for Japanese greens, Chinese greens, high-mountain oolongs, Darjeelings, robust blacks, pu-erh, and whites—dial in water to match your leaf.
• Remineralisation recipes and concentrates: Step-by-step formulas to build brewing water from RO or distilled base using food-grade salts; includes 100× concentrate method for cafés.
• Commercial filtration systems compared: Carbon, RO, ion-exchange, and blended in-line systems—what each removes, what it costs, and which to choose for your volume and source water.
• Water economics and ROI analysis: Cost-per-litre breakdowns and payback periods for filtration vs. bottled water; real-world café case study at 150 cups/day.
• Seasonal & regional variation: How UK mains water shifts month-to-month and region-to-region; quarterly audit protocol to maintain consistency year-round.
• Brew pH management: Why brew pH (not just water pH) governs clarity and balance; how to measure it, interpret it, and adjust with food-grade acids or buffers.
• Professional cupping protocol: The blind, controlled method to prove water differences and choose the right profile—adapted from SCA standards, used by buyers and competition judges.
• Troubleshooting edge cases: Iron, silica, sulfate, copper, and nitrate—how to detect and treat the obscure contaminants that standard tests miss.
Tea is 99% water, yet water chemistry is the most underestimated variable in the entire extraction chain. You can source impeccable leaf, time your steep to the second, and control temperature to a tenth of a degree—but if your water is wrong, the cup will disappoint. Bitterness, metallic notes, dull colour, muted aroma: these are not failures of the tea; they are failures of the solvent.
This guide exists because folklore has crowded out fact. 'Use spring water.' 'Soft water is best.' 'Boil it twice and it goes flat.' Almost none of the common advice rests on measurement or mechanism. Meanwhile, the speciality coffee world has spent two decades mapping the relationship between water composition and extraction, publishing data, running triangulation tests, reverse-engineering target profiles. The tea trade has lagged—but the chemistry is identical.
We wrote this handbook for two audiences: the home enthusiast chasing the perfect brew, and the café owner, blender, or buyer who needs to understand how water affects consistency, cost, and customer experience at scale. You will learn what total dissolved solids (TDS), general hardness (GH), carbonate hardness (KH), and pH actually mean; which minerals matter and why; how to measure your water; and how to fix it—whether you're brewing a single gaiwan or running a 200-cover tearoom.
This is not a meditation on purity. It is a practical, evidence-based manual. Where the science is settled, we give you numbers. Where it remains imprecise—because tea extraction is more complex than coffee, and the research thinner—we tell you that, too. By the end, you will understand your water better than 99% of the people selling you tea.
Let's begin with the molecules.
Water is not H₂O. Tap water, bottled water, even 'pure' spring water—all are solutions carrying dozens of dissolved ions, gases, and trace minerals. Four parameters govern how that solution will extract tea, and you must understand all four to diagnose problems or design improvements.
TDS measures everything dissolved in the water, reported in parts per million (ppm) or milligrams per litre (mg/L), which are numerically identical. A TDS of 150 ppm means 150 mg of 'stuff' per litre. That stuff includes calcium, magnesium, sodium, bicarbonate, chloride, silica, and more. TDS tells you the total load, but not the composition—two waters with identical TDS can taste utterly different and extract completely differently if their mineral profiles diverge.
For tea, the consensus target sits between 50–150 ppm. Below 50 ppm, water can taste flat and extract weakly, because there is insufficient ionic strength to pull certain flavour compounds into solution. Above 200 ppm, you risk masking delicate notes and amplifying mineral or metallic flavours. Speciality coffee brewers converge on 75–125 ppm; tea drinkers should aim for the same neighbourhood, adjusting by tea type.
General hardness (GH) measures the concentration of calcium (Ca²⁺) and magnesium (Mg²⁺) ions, reported in ppm as CaCO₃ equivalent or in degrees (°dH, °e, °fH; 1 °dH ≈ 17.8 ppm). These divalent cations are the primary extraction agents in water: they bind to polyphenols, proteins, and other charged flavour molecules, pulling them out of the leaf. Water with near-zero GH extracts weakly and tastes thin; water above 200 ppm GH can over-extract, emphasising bitterness and astringency.
Carbonate hardness (KH), also called temporary hardness or alkalinity, measures bicarbonate (HCO₃⁻) and carbonate (CO₃²⁻) ions. KH is your buffer: it resists changes in pH. High KH water (>100 ppm) suppresses acidity, muting brightness and liveliness in the cup. It also contributes to limescale formation when boiled. Low KH (<40 ppm) offers less buffering, so the tea's natural acids drop the brew pH more freely, which can enhance clarity and floral notes but may also accentuate astringency.
pH quantifies acidity on a scale of 0 (highly acidic) to 14 (highly alkaline), with 7 being neutral. Most potable water sits between pH 6.5 and 8.5. Tea itself is acidic: a typical infusion lands between pH 4.5 and 6.0, depending on leaf type, oxidation level, and water composition. The starting pH of your water matters because it sets the baseline from which the tea's acids must work. High-pH water (≥8.0) will yield a higher-pH brew, often perceived as flat or soapy. Water below pH 7.0 can produce a brighter, more aromatic cup—but if KH is also low, the brew may tip into sharp or sour territory.
Always record TDS, GH, KH, and pH together. A single number—'my water is 120 ppm'—is almost useless. The magic (or misery) lies in the ratios and the interplay among these four dimensions.
Extraction is an electrochemical dance. Water does not simply dissolve tea; charged ions in the water latch onto charged molecules in the leaf and drag them into solution. The identity and concentration of those ions determine which compounds extract first, how fast, and in what proportion—which is why two waters can produce radically different cups from the same leaf.
Calcium (Ca²⁺) and magnesium (Mg²⁺) are divalent cations: each ion carries a +2 charge, making them powerful attractors for negatively charged polyphenols (catechins, theaflavins, tannins) and organic acids. Research in coffee extraction—which translates directly to tea—shows that magnesium is the more aggressive extractor, pulling more total dissolved solids and more bitterness into the cup. Calcium is gentler, contributing body and sweetness without as much astringency.
A balanced water might carry 30–50 ppm calcium and 10–20 ppm magnesium. Tilt too far toward magnesium (common in some bottled waters marketed for coffee) and you risk over-extraction, especially with delicate greens or high-grade whites. Lean too heavily on calcium (common in southern England and the Midlands) and you may get a flat, chalky mouthfeel.
Bicarbonate (HCO₃⁻) is the primary component of KH. It is a base, and it neutralises the acids that give tea its brightness and complexity. High-bicarbonate water (>80 ppm) produces a higher final brew pH, which suppresses perceived acidity, flattens aromatics, and can make even a lively Darjeeling taste dull and soapy. In extreme cases (KH >150 ppm), you will notice a chalky, mineral aftertaste—the signature of over-buffered water.
For most teas, target KH between 20 and 60 ppm. Japanese greens and high-altitude oolongs benefit from the lower end; robust blacks and roasted oolongs tolerate the upper range.
Sodium (Na⁺) and chloride (Cl⁻) do not drive bulk extraction, but they shape perception. Sodium at 5–15 ppm can enhance sweetness and roundness—the same principle behind adding a pinch of salt to coffee. Above 30 ppm, it begins to taste salty. Chloride at 5–20 ppm can boost body and mouthfeel, but above 40 ppm it may introduce a flat, minerally character.
Both are typically present in trace amounts in good brewing water, and you should rarely need to adjust them directly. The exception is if you are blending water from reverse-osmosis (RO) or distilled bases, where deliberate addition of a sodium-bicarbonate or sodium-chloride solution can fine-tune the profile.
If your water is soft and the brew tastes thin, add magnesium. If it tastes harsh or metallic, add calcium or reduce magnesium. The Ca:Mg ratio is as important as the absolute levels.
You cannot improve what you do not measure. Guessing your water chemistry from taste or from a postcode is folklore. The good news: reliable measurement is cheap, fast, and requires no laboratory.
A handheld TDS meter (also called a conductivity meter) costs £8–25 and gives you an instant readout in ppm. Calibrate it monthly with a reference solution (typically 1413 µS/cm or 342 ppm NaCl). Measure at room temperature; TDS readings drift with heat. A TDS meter tells you the total load but reveals nothing about composition—essential for a first pass, insufficient for diagnosis.
Aquarium-grade titration kits (widely available for £6–12) measure GH and KH in drops. Add reagent drop by drop until the sample changes colour; each drop equals a fixed increment (commonly 1 °dH ≈ 17.8 ppm). These kits are accurate to ±10%, which is more than sufficient for brewing. Test both cold tap water and boiled-then-cooled water; boiling precipitates some carbonates, dropping KH.
Litmus strips (£5 for 100) give ballpark pH (±0.5 units). For precision, invest in a digital pH meter (£20–60). Calibrate with pH 4.0 and 7.0 buffer solutions before each use. Measure your source water, then measure the finished brew; the difference tells you how much acid the tea contributed and how well your water buffered it.
UK water suppliers publish annual quality reports online, listing average TDS, hardness, pH, chloride, sodium, and more by postcode. These are annual averages; real-time composition can vary seasonally (hardness often rises in summer). For commercial operations, request a detailed lab analysis (£40–80) from an accredited laboratory; you will receive Ca, Mg, Na, K, HCO₃, Cl, SO₄, and trace elements to 1 ppm precision.
| Parameter | Home Test Method | Typical Cost | Accuracy |
|---|---|---|---|
| TDS | Handheld meter | £8–25 | ±2% |
| GH (Ca + Mg) | Titration drops | £6–12 | ±10% |
| KH (Bicarbonate) | Titration drops | £6–12 | ±10% |
| pH | Digital meter | £20–60 | ±0.1 |
| pH | Litmus strips | £5 / 100 | ±0.5 |
| Full mineral profile | Lab analysis | £40–80 | ±1 ppm |
Boiling drives off dissolved CO₂, precipitates calcium carbonate (limescale), and shifts pH upward. Always measure KH and pH on boiled-then-cooled water—that is the water your tea will actually meet.
Once you have numbers, you can diagnose. The following table maps common flavour defects to their likely chemical cause. Use it as a decision tree: taste the problem, test the water, apply the fix.
| Flavour Defect | Likely Cause | Confirming Test | Typical Range |
|---|---|---|---|
| Flat, dull, lifeless | TDS too low; insufficient GH | TDS <50 ppm; GH <30 ppm | Target TDS 75–125; GH 50–100 |
| Bitter, astringent, metallic | GH too high; excess Mg | GH >150 ppm; Mg >30 ppm | Reduce GH to 60–120 ppm |
| Chalky, soapy aftertaste | KH too high | KH >100 ppm; pH >8.0 | Target KH 20–60 ppm |
| Muted aroma, no brightness | High KH suppressing acidity | KH >80 ppm; brew pH >5.5 | Lower KH; aim brew pH 4.5–5.2 |
| Thin body, watery mouthfeel | Low GH and low TDS | TDS <60 ppm; GH <40 ppm | Add Ca/Mg to raise GH to 60+ |
| Sour, sharp, aggressive | Very low KH; water pH <6.5 | KH <20 ppm; pH <6.8 | Add small KH to buffer; target pH 7.0–7.5 |
| Chlorine / swimming-pool note | Residual chlorine or chloramine | Nose test; water authority data | Carbon filter or stand overnight |
This table is a starting point, not a formula. Tea chemistry is multivariate: a flat cup might be low GH or high KH or stale leaf or low temperature. Always change one variable at a time, and always taste blind where possible.
Brew the same tea with three waters: your current water, a known-good bottled water, and a remineralised or filtered candidate. Taste blind. If you cannot reliably pick out the odd one, the difference does not matter—and you have just saved yourself money and overthinking.
Get the full remineralisation recipes, commercial filtration guide, water economics, cupping protocol, and troubleshooting edge cases—everything you need to take total control of your brew.
The Complete Edition includes:
Print-ready A4 format. Instant PDF download.
Just £29.99.
🔓 Upgrade NowQuestions about upgrading?
TeaTrade
EXPERT EDUCATION SERIES
© 2026 TeaTrade UK · Science-Based Tea Education